(Amendmen to blog to ) You Can Show Some Love Today

B.S.T.A.

Bead and Sparkly Things Addicts

Looking at all the beautiful Designs in the Bead Soup Blog Party Challenge.
I realized just how many B.S.T.A Addicts there must be out there.

I am sure that many of you have drooled lovingly over others Beads and Sparkles, Accessories, the list just goes on an as we all know.

So without hesitation I decided maybe foolishly why not have a List and Photos of where we can FIND these Beautiful Beads and Sparkly Bits and Pieces.

If you have ever said “ WOW” “Where Did They Get Those”

You Can Show some Love Today

Put a Photo On My Blog

Show us where you found those Beautiful Beads

Sparklys and Accessories

Don't forget to include your Blog URL

Then Watch The Love Come Back

New friends to your blog

(you might even get some free beads)

Take a look at all those Beautiful Beads, Sparklys & Accessories

See all the beautiful things out there and the Jewellery they made

Here the list of participants, just click on the names to see all there wonderful creations

A Big Thank You to Lori Anderson

Who made all this possible

The Hostess, Lori Anderson

and her partner, Manuela Wutschke

Bead Soup Party Necklace, Autumn Angel 2 in 1 Necklace

A real statement 2 in 1 Autumn Fairy -- My Bead Soup party Necklace

Unfortunately I had to wait weeks and weeks for my beautiful beads from Gillygembeads and then weeks and weeks when it finally got to me,none of the Gillys fault I have to add.

In my parcel, the Angel was already made that gilly sent me,I had lovely Semi precious Stone chips,the 4 flower connectors the Gold plated hearts and some tiny seed beads, you can see these on the loop of the angel.

I decided to hand wire wrap with gold wire that I had aged, I added 24K Gold plated beads and finally I loosely wrapped with pure Copper entwined with 24K Gold plated beads.
I hung the fairy on the heart which I aged, with a small copper Key ring attachment, so she can be removed, if you wanted to wear the necklace part on its own.

This has mixed Semi precious stone chips,again I hand wire wrapped gold wire and aged it.
Then as before I loosely wrapped Pure Copper entwined with the lovely 24K gold beads
I made a Pure copper hook and lightly hammered it and added the tiny gold plated heart,

I loved making her, The Autumn Fairy is a real statement piece and of course she can be easily removed to leave the Necklace on it's own.
I hope you like what I have made Gilly, thank you I had great fun making her.

If you want to enter the next Bead soup blog party click the button on the right of my blog.

You can come along to my new wire Wrapped jewellery making club too Create Learn Play & Earn, I run competitions,Freebies as well as lots of fun please join at this link.
http://wirelicious-jewellery.blogspot.com/

Wirelicious Jewellery, Create Learn Play & Earn, Wire Wrapped Jewellery Making Club: Tutorial Part Two, Wire Wrapped Pendant

Wirelicious Jewellery, Create Learn Play & Earn, Wire Wrapped Jewellery Making Club: Tutorial Part Two, Wire Wrapped Pendant

Tutorial Part Two, Wire Wrapped Pendant

This is what your finished Wire Wrapped Bezel pendant will look like.
I have done a coiled Bail on mine, yours will be a plain wrapped bail
TOP TIP

On this picture I have deliberately left out the Flat Spacer Bead cap at the top of the Bezel frame, this shows you the gap that will be left if you do not include it.

The Spacer Bead cap helps to make the bezel a completed Circle, making it much tidier.

You will also notice that the bead at the bottom is not quite central, this is because it is Handmade it is not enough to ruin the design.
Always check that your bead is not too much off centre, it can save a lot of problems later on.
In case you missed the 1st part of this tutorial here is the link
http://wirelicious-jewellery.blogspot.com/2011/08/tutorial-for-wire-wrapped-pendant-part.html

Part Two Wire Wrapping the Bezel Frame
It is always a good idea to take a piece of 20 Gauge wire and practice Wire Wrapping first.

As I have no means yet to video this , here is a link of the Lisa Niven Kelly wire wrapping tutorial, one of the best.
http://youtu.be/w2DhU4gf9aU

Top Tip,
Dont use more than 2ft of wire at a time, as it will end up getting knotted up.
Now flush cut 2ft of 28 Gauge wire, and at the shoulder of the bezel frame, this is where the 20 gauge wires meet at the central bead hole, wrap around one of the 20 gauge wires tightly 4 times to secure,carry on wrapping like this all the way around to the opposite side of the bezel frame next to the bead hole on the other side.

When you start to run out of wire, wrap the last few wraps tightly then flush cut as close to the wrapping as possible, then using your chain nose pliers press your wire around until no sharp ends are poking out.
Start again as before with your new piece of 28 gauge wire.


I tape my bezel as I go to keep it up against the bead as shown here.
On the two thinner wires coming out of the bead hole slip on a Flat Spacer Cap bead.

Now you are going to be making your Bail loop for the chain to go thru.

Make sure all your wires are flat against each other for the next stage.
With the rest of the 28 Gauge wire carry on wrapping as before up the four wires, when you have about 6 wraps left to go wrap a couple more times tightly, then flush cut the 28 gauge wire as close as you can to the wrapping and with your chain nose Pliers press the end around till no sharp points are left.
You should now have about 1/4 of an inch which is un wrapped.

Making the loop for the Bail.

To make a good even bail you are going to need to loop the bail shank you have just finished wrapping over something round, a thick sharpie pen or or you can use pliers as in the photo
Gently using your thumb push the wire wrapped shank over the pliers until the ends reach 3/4 of the way down at the back of the wrapped shank,then take your Chain nose pliers and grasp the unwrapped ends of the wire wrap this around the shank about 3 times as neatly as possible, trim off any ends, with your chain nose pliers flush cut any remaining wire and press them in until there are no sharp ends.
If your loop bail has become a little mishappen ,use your round nose pliers to straighten the Bail.


Congratulations
You have now finished your 1st Wire wrapped Bezel frame Pendant.If you have any questions please leave them in the comments section of the blog.

Post your finished Pendant on my blog and you could Win this Set of Pliers Pendant with the most Votes Wins.
Make sure you get all your friends to vote for you.




Next Tutorial is this lovely Pendant that I been asked to do.,

Are Customs loosing you Customers

In this age of Internet Shopping do you know how many customers you are loosing thru customs charges and Post Office Fees.

After paying extortionate Custom fees and on more than one occasion and a Post Office charge of £14.00, for small packets/parcels I have decided to post this to you all.

If you are posting anything to the United Kingdom, Please read this ,it will save you,
1) Money
2) Loosing Customers after their first Order.
3) Customers buying off you in the first place
4) Your goods being returned to you.

5) For customers the hassle that goes with the having to ring the

Sorting Office, Paying the Fee,Paying the Post Office Fee,

and Finally getting it Delivered thru a Delivery Service and having to wait in all day and they don't turn up.

I guess after all this they wont be Ordering again.
Would You ?

Of course all company's have to put a Disclaimer about your Customs Charges.
Please pass this link to others.
Thank you ,
Bella

My Disclaimer in no way am I inferring that you should not state anything but the proper contents and Value of your Packet/Package, this link is for information only.

http://customs.hmrc.gov.uk/channelsPortalWebApp/channelsPortalWebApp.portal?_nfpb=true&_pageLabel=pageTravel_ShowContent&id=HMCE_CL_000014&propertyType=document#P159_16963

Bead Soup Party

Bead Soup Party ?

Whats it all about, simple join Loris great blog and get a Bead Partner selected for you,.
Then they send you Free Beads of their style of Jewellery and you send them Beads of your style of Jewellery.
It's great for thinking outside the box in jewellery Design.
Post a photo of your made item of Jewellery to Loris blog founder of the Bead Party.
Loris site is full of fun things to do.
http://lorianderson-beadsoupblogparty.blogspot.com/ .
Don't worry if the due date has gone theirs always another Bead Party.
My Bead Partner is Gillybeangems

 http://gillybeansgems.blogspot.com/

  Who makes lovely Jewellery and my Beads come tomorrow I'm so excited.
Oh I almost forgot don't forget to Follow my Blog for My  New Create Learn Play & Earn, Wire Wrapped Jewellery Making Club for Beginners thru to business or come along and Learn a New Hobby.

" Like" our Facebook page here
http://www.facebook.com/pages/Wirelicious-Jewellery/167566746604532//
For 10% off all orders